Anycubic ABS-Like V2 Resin - ABS-like performance in resin
Photopolymer resin with mechanical and thermal properties similar to ABS filament. Combines the precision of resin printing with high strength and toughness. Ideal for functional prototypes that require robustness.
Technical specifications
- Type: 405nm ABS-Like photopolymer resin
- Weight: 1 kg
- Viscosity: 200-280 mPa·s
- Wavelength: 405nm
- Tensile strength: 35-45 MPa
- Elongation at break: 30-40%
- HDT (Heat Deflection Temperature): 60-65°C
Distinguishing features
- Mechanical properties similar to ABS filament
- High strength and toughness
- Good thermal resistance (HDT 60-65°C)
- Elongation 30-40% (less brittle than standard resins)
- Washable with water or isopropyl alcohol
- Versatile for functional applications
- High dimensional precision
Ideal applications
- Resistant functional prototypes
- Mechanical parts subject to stress
- Cases and housings
- Components subject to bending
- Snap-fit and attachment mechanisms
- Parts with tight tolerances
- Pre-production functional tests
Advantages vs standard resins
- Superior impact resistance
- Greater toughness and flexibility
- Better thermal resistance
- Ideal for functional parts subjected to stress
Post-processing workflow
- Wash: 5-10 min in water or isopropyl alcohol
- Drying: Compressed or natural air
- UV post-cure: 10-15 min per side
- Post-cure temperature: 50-60°C for optimal properties
Printing tips
- Layer height: 0.05-0.1mm
- Exposure time: 2.5-4s (adjust for printer)
- Bottom layers: 6-8, time 30-40s
- Lift speed: Moderate
- Shake well before use
- Room temperature: 20-25°C
Anycubic ABS-Like V2 Resin is the perfect choice for functional prototypes that require the mechanical properties of ABS with the precision of resin printing.
