Anycubic ABS-Like Resin 3.0 is a 1 kg photopolymer resin for 365–405 nm LCD and DLP printers, designed to combine precision, impact resistance, and useful flexibility. Its low viscosity supports fine-detail filling and fast curing, while controlled shrinkage helps preserve dimensions and surface definition.

Main features

• Elongation at break: 25–30%
• Shore hardness: 83–86D
• Viscosity: 280–300 mPa·s at 25 °C
• Volumetric shrinkage: 3.9–4.9%
• Wavelength: 365–405 nm
• Contents: 1 kg

Recommended use

Shake well before use. Indicative settings: 2–3.6 s normal exposure and 23–40 s first-layer exposure; always calibrate for the printer, color, and environment. After printing, wash with 95% isopropyl alcohol for at least 3 minutes and post-cure under 405 nm UV light for about 3 minutes.

Safety

Uncured resin requires suitable gloves, eye protection, and good ventilation. Avoid contact with skin and eyes. Review the official SDS and technical data sheet before use; dispose of resin and waste according to local regulations.